Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Aurora, CO

CHI Overhead Doors Commercial Garage Door Repair in Aurora, CO

Repairs for commercial sectional, overhead and service doors. Typical cost $250-$1,000.

From the first phone call to the final safety test, CHI Overhead Doors commercial garage door repair in Aurora, CO follows a simple process: diagnose, quote, repair, test. Repairs for commercial sectional, overhead and service doors. We work on CHI Overhead Doors commercial doors of every age, from older models to current lines, and carry or can source compatible parts.

Safety first: springs and cables hold hundreds of pounds of tension. Don't try to adjust or remove them yourself, and don't run the opener on a door that's crooked or has a broken spring.

Signs you need CHI Overhead Doors commercial garage door repair

  • The door won't open or close, holding up deliveries
  • Damage from forklifts or trucks
  • Broken springs or cables on a heavy commercial door
  • The operator faults or stops

Why this happens

  • High cycle counts
  • Vehicle impact
  • Worn springs, cables and rollers

Before the technician arrives

  • Put the door out of service and keep staff clear.
  • Note any fault codes on the operator.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Secure the door and assess the damage
  2. Quote parts and labor
  3. Repair springs, cables, sections or track
  4. Adjust or repair the operator
  5. Test safety devices

How much does CHI Overhead Doors commercial garage door repair cost?

$250-$1,000Typical range, parts & labor
1-4 hoursTypical time on site

What moves the price:

  • Door size, gauge and cycle rating
  • Operator type and controls
  • Parts availability for your model
  • Lift equipment and after-hours access

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other CHI Overhead Doors services

Serving Aurora, CO and nearby towns

Large daily temperature swings in Colorado work hinge screws and track bolts loose, which leads to noise, wobble and eventually an off-track door.

Besides Aurora (ZIP codes 80010, 80011, 80012, 80013, 80014 and more), we handle CHI Overhead Doors commercial garage door repair in Glendale (5.7 mi), Commerce City (7.7 mi), Denver (8.1 mi) and Cherry Creek (8.3 mi). Call (833) 435-8883 to book a visit in Aurora.

CHI Overhead Doors Commercial Garage Door Repair: frequently asked questions

How much does CHI Overhead Doors commercial garage door repair cost in Aurora, CO?

CHI Overhead Doors Commercial Garage Door Repair typically costs $250-$1,000 including parts and labor, and usually takes 1-4 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do CHI Overhead Doors commercial garage door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is CHI Overhead Doors commercial garage door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and CHI Overhead Doors warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Colorado or Aurora requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my commercial door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Aurora, CO

Richards-Wilcox Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Ideal Door Off-Track Garage Door Repair

Doors that have come off their tracks secured, re-hung and realigned.

Typical $175-$450

Windsor Door Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Northwest Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Trac-Rite Roll-Up Door Repair

Trac-Rite roll-up doors are widely used in self-storage buildings.

Typical $150-$600

Ryobi Smart Garage Door Opener Setup

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $100-$900

Raynor Remote & Keypad Programming

Remotes, keypads and car buttons matched and programmed to your opener.

Typical $50-$150

Holmes Garage Door Torsion Spring Replacement

Torsion springs replaced and wound correctly, with high-cycle upgrades available.

Typical $200-$450

Stanley Opener Circuit Board Replacement

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $175-$400

Moore-O-Matic Garage Door Opener Repair

Moore-O-Matic openers are no longer made. We can often keep one running with available parts, or recommend a modern replacement.

Typical $125-$350

Haas Door Torsion Spring Replacement

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $200-$450

Wayne Dalton Garage Door Panel Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $300-$900

Garage door stuck, noisy or broken?

Talk to a garage door technician in Aurora, CO now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote